DrewFab Steering Pins

Our steering pin kit replaces the existing nyliners, cross bolts, and pins in your nozzle adapter on your jet drive. Our pins bolt to the nozzle adapter using 4 #10 screws per pin. Our pins remove all "slop" from the assembly and provide smooth steering action for true 1 finger steering. Please read the entire description prior to purchasing! Please watch the instructional video prior to ordering.

 These will not work with a rudder; you will have to remove the rudder or only use 1 pin.

Our steering pins fit the following nozzle adapters:

• Place diverter full droop
• Place diverter HPH (mini droop
• American turbine full droop (requires adapter washer)

We do not recommend using a Berkeley droop snoot as they require significant machining.

The kit comes with the following components:

• 2x 304ss pins
• 8x ss 10-32 x 3/8 screws
• 4x # 113 buna n o-rings
• 2x 1/8" pipe thread brass zerk fittings
• 2x Delrin washers
• AT adapter washer (if American Turbine droop is selected)

Optional:

• Drill and tap kit (diy modification)
• Nozzle adapter machining if you chose to have us machine your droop/nozzle adapter please ship it and your nozzle to DrewFab 10455 Valle vista road, Lakeside CA, 92040. Put your order number as the "reference"

If you have a Berkeley JC bowl and would like to have the modification done, please contact us prior to ordering as there is an additional machining charge for the bowl.