Teleflex "The Rack" Rack and Pinion Steering Cable Kit
Part Number: 464-SS14108
Traditional SeaStar Solutions (formerly Teleflex Marine) mechanical rack steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required. The Back Mount Rack Steering System features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice for power-steered boats.
Suitable For:
Virtually all Power-Assisted Sterndrive and Inboard Boats with Wheels up to 16-inch Diameter. - SS141xx Replaces 1984 and Newer SeaStar Solutions 'The Rack' Steering without dash modification (Requires use of SSC134xx Back Mount Rack Cable Enclosed).
Kit Contains the Following:
(1) SH5210P Helm; (1) SB39526P 90 Degree Bezel Kit; (1) SSC134xx Steering Cable; Hardware and Instruction Sheets.
Note: This System is for Single Station use ONLY. Components are available for Dual Cable Systems, but we Recommend No Feedback (NFB) Steering for all Dual Cable Steered, Non-Power Assisted Outboards. This System is only recommended as a replacement for the original system as installed by the boat manufacturer. SeaStar Solutions always recommends NFB Helms for Outboard Applications.
Note: SSC124xx Old Style Rack Cables cannot be used with these systems.
Suitable For:
Virtually all Power-Assisted Sterndrive and Inboard Boats with Wheels up to 16-inch Diameter. - SS141xx Replaces 1984 and Newer SeaStar Solutions 'The Rack' Steering without dash modification (Requires use of SSC134xx Back Mount Rack Cable Enclosed).
Kit Contains the Following:
(1) SH5210P Helm; (1) SB39526P 90 Degree Bezel Kit; (1) SSC134xx Steering Cable; Hardware and Instruction Sheets.
Note: This System is for Single Station use ONLY. Components are available for Dual Cable Systems, but we Recommend No Feedback (NFB) Steering for all Dual Cable Steered, Non-Power Assisted Outboards. This System is only recommended as a replacement for the original system as installed by the boat manufacturer. SeaStar Solutions always recommends NFB Helms for Outboard Applications.
Note: SSC124xx Old Style Rack Cables cannot be used with these systems.
- Precise, Easy 4 Turns Lock-to-Lock
- Standard 3/4" Round Tapered Steering Shaft
- Stainless Steel Cable Output Ends
- Fast, Easy Installation: Back Mount Design Allows Quick Placement in Dash PLUS Mounting Hardware fits Old Teleflex and SeaStar Solutions Rack Holes
- Meets A.B.Y.C. Standards
- Meets N.M.M.A. Certification Requirements
- Made, Designed and Assembled in the USA
- Kit Sizes vary from 8 to 20 Feet
